About the product.

Camera is a recent purchase, I do not use Nikon gear, hence selling it off at a third the price of a perfectly functioning unit. All buttons and features on the cameras work (others than the ones detailed below). Camera is functional. Light meter is accurate. Camera is film tested. Viewfinder LCD works and active. Camera AF works AF-S lenses, but MF will work with AF and AF-P lenses, with the camera helping the users to nail focus. The camera aperture couples with and works with AI-S lenses (tested and confirmed). The camera is powered with 8 AA batteries, housed in the rare MS-30 battery holder. The holder is intact with all contacts clean. Top and Back LCDs work, clean and legible, along with backlight. The camera is equipped with DP-30 Viewfinder and EC-B focusing screen. The mirror, viewfinder and focusing screen are clean. The camera's DOF preview, mirror lockup, and AF control buttons and knobs work. The drive modes all work as intended. Both shutter buttons also work. Lens is clean, with aperture is clean, zoom and MF are smooth. AF on the lens works (tested on other cameras). Now for what does NOT work, put in accordance of severity. A. Camera's inbuilt AF motor does not work, 'AF' lenses, those with no internal focusing motor, will not autofocus on the camera, the lens paired with this camera, and all D series lenses will not autofocus, however as explained before, MF will work and as the camera is able to communicate with the lens, it will be able to help you nail the MF on the subject. AF-S lenses, those with internal focusing motors in the lens itself will have full functionality with the camera no problem. B. The viewfinder has a mark down the middle of it; this is sadly prism rot and cannot be fixed, other than a very expensive replacement. In practice this is not too bad when shooting, arguable helps keep a central frame of reference, otherwise the viewfinder has not functionality issue. C. The front and back control dials are sometimes finicky, it sometimes skips, or does not change settings, i think this is a result of dirty contact in inside, getting a light service should fix this, as for now just trying again to change the settings works. The issue is only noticeable when trying to make small changes, for large changes the dials work no problem. D. The directional controls on the film back door, the Up button is unresponsive, which limits AF point selection to 4 AF points. E. The viewfinder eye cup is missing, a replacement Rs600/- DK-17 eye cup from Amazon will easily resolve this.

Specifications

  • 35mm film format, Nikon F mount
  • Shutter speeds 30s to 1/8000s, plus bulb
  • Flash sync up to 1/300s
  • 5-area autofocus system
  • 1005-pixel RGB matrix metering, plus center-weighted and spot modes
  • Interchangeable focusing screens
  • Built-in motor drive, up to 8 fps with optional battery grip
  • Powered by 8x AA batteries (MS-41 grip) or 2 CR123A (MN-30 grip)
  • Kit lens: 28-80mm f/3.3-5.6G, no aperture ring, autofocus only

Condition

  • Cosmetic: Good
  • Working: Fully Working
  • Shutter speeds: Fire correctly at all speeds
  • Light meter: Working and accurate
  • Viewfinder and prism: Prism rot or desilvering
  • Light seals: Replaced or still sealing
  • Glass — fungus, haze, scratches: Clean and clear
  • Aperture blades: Dry and snappy
  • Lens focus ring: Smooth
  • a. Camera's internal AF motor does not work. AF only works with AF-S lenses, for all other lenses, assited MF will work. AI-S lenses are fully MF.
  • b. Viewfinder has a mark down the exact middle, limited prism rot, IMO pretty usable. No workaround.
  • c. Both control dials are a little erratic, sometimes to takes two twists of the dials instead of one, when the change needed is in 1/3 step.
  • d. The direction controls on the film door, the UP direction is unresponsive, so only the top AF point is un-selectable, the rest 4 AF points are selectable.
  • e. The eyecup is missing. Replacement DK-17 eyecup can be acquired online, easily.

Included

  • Camera body cap
  • Lens Front and Rear caps & Strap.

In short

Declared faults, if any, are called out above rather than left for you to discover — what's listed is what you get.